Brother International SE2000 Operation Manual - Page 86

Embroidering ■ Removing the embroidery frame Raise the presser foot lever to raise the presser foot. a While pushing the lever of the embroidery frame b holder to the left, slightly lift the back and then the front of the embroidery frame up to clear the pins and then remove. Hold the lever lightly to the left. Embroidering ■ Copyright information The patterns stored in the machine are intended for private use only. Any public or commercial use of copyrighted patterns is an infringement of copyright law and is strictly prohibited. ■ Embroidery pattern types a b a c e 1 Lever Remove the back mounting bracket from the pin. a b 1 Back mounting bracket 2 Back pin Remove the front mounting bracket from the pin. a b 1 Front mounting bracket 2 Front pin CAUTION • Do not hit the needle with your finger or the embroidery frame. It may cause injury or needle breakage. f dg 1 Embroidery patterns 2 Brother "Exclusives" 3 Floral alphabet patterns 4 Character patterns 5 Frame patterns 6 Touch this key to position the embroidery unit for storage. 7 Patterns saved in the machine's memory, patterns saved in USB flash drive, or patterns transferred via wireless network (page 100) • Refer to the "Embroidery Design Guide" for more information on each category's embroidery pattern. Selecting an embroidery pattern Touch in the pattern type selection screen, and a then touch . • If the pattern type selection screen is not displayed, touch to display the screen below. Touch or b screen. to display the desired pattern on the 84