Brother International SE2000 Operation Manual - Page 85
Correctly set the embroidery frame into the, embroidery frame holder. Otherwise, the, presser foot
View all Brother International SE2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
Press the front mounting bracket onto the pin until it fits into place. a b 1 Front mounting bracket 2 Front pin Press the back mounting bracket onto the pin. a b 1 Back mounting bracket 2 Back pin Embroidering Preparation Note • Be sure to completely insert both pins. If only one of the pins is inserted, the pattern may not turn out correctly. • Make sure that the notch on the side of the embroidery frame fits firmly under the bend in the lever. a c b d 1 Notch on embroidery frame 2 Bend in lever 3 Carriage 4 Embroidery frame Notch (1) fits firmly under the bend in the lever (2). b c ad Notch (1) does not fit firmly under the bend in the lever (2). EMBROIDERY 4 a c bd 1 Notch on embroidery frame 2 Bend in lever 3 Carriage 4 Embroidery frame CAUTION • Correctly set the embroidery frame into the embroidery frame holder. Otherwise, the presser foot may hit the embroidery frame, resulting in injury. 83