Brother International SE2000 Operation Manual - Page 47
Various Stitches
View all Brother International SE2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
3 Chapter VARIOUS STITCHES Stitch Chart Stitch Chart ■ Utility stitches Applications, stitch lengths and widths and whether the twin needle can be used, are listed for utility stitches in the following table. Memo • When any of the following stitches (reverse stitch patterns and reinforcement stitch patterns) are selected, pressing (Reverse stitch button) will sew reverse stitches. No. Stitch No. Stitch No. Stitch No. Stitch 1-01 1-09 1-13 1-31 1-02 1-10 1-14 1-33 1-03 1-11 1-29 1-04 1-12 1-30 When any other stitch is selected, pressing (Reverse stitch button) will sew reinforcement stitches. • The stitch pattern symbols indicate the following. a b d de e c 1 Left needle position 2 Middle (center) needle position 3 Right needle position 4 Reverse stitch pattern 5 Reinforcement stitch pattern *1 Twin needle can be used by attaching zigzag foot "J". Stitch (Presser No. foot) Stitch name/ Applications Stitch Stitch width length (mm (inch)) (mm (inch)) Auto. Auto. Manual Manual Straight stitch (Left)*1 0.0 (0) 2.5 (3/32) 1-01 General sewing, gather, 0.0 - 7.0 0.2 - 5.0 (J) pintuck, etc. (0 - 1/4) (1/64 - 3/16) Straight stitch (Left)*1 0.0 (0) 2.5 (3/32) 1-02 General sewing, gather, 0.0 - 7.0 0.2 - 5.0 (J) pintuck, etc. (0 - 1/4) (1/64 - 3/16) Straight stitch 1-03 (Middle)*1 General sewing, gather, (J) pintuck, etc. 3.5 (1/8) 0.0 - 7.0 (0 - 1/4) 2.5 (3/32) 0.2 - 5.0 (1/64 - 3/16) Straight stitch 1-04 (Middle)*1 General sewing, gather, (J) pintuck, etc. 3.5 (1/8) 0.0 - 7.0 (0 - 1/4) 2.5 (3/32) 0.2 - 5.0 (1/64 - 3/16) Triple stretch stitch*1 1-05 General sewing for reinforcement and (J) decorative topstitching 0.0 (0) 0.0 - 7.0 (0 - 1/4) 2.5 (3/32) 0.4 - 5.0 (1/64 - 3/16) Stem stitch*1 1-06 Reinforced stitching, sewing and decorative (J) applications 1.0 (1/16) 2.5 (3/32) 0.0 - 7.0 0.4 - 5.0 (0 - 1/4) (1/64 - 3/16) Decorative stitch*1 0.0 (0) 2.5 (3/32) 1-07 Decorative stitching, top 0.0 - 7.0 0.4 - 5.0 (N) stitching (0 - 1/4) (1/64 - 3/16) Basting stitch For basting. If the basting threads fall out of the fabric, pull up the bobbin thread before sewing, and then pull the upper thread and bobbin thread under the presser foot toward the back of the machine (page 27). Hold the 1-08 upper thread and (J) bobbin thread when beginning to sew, and 0.0 (0) 0.0 - 7.0 (0 - 1/4) 20 (3/4) 5 - 30 (3/16 - 1-3/ 16) when finished sewing, cut the threads leaving an excess amount of thread. Finally, hold the upper thread and bobbin thread at the beginning of the stitching while arranging the fabric. Zigzag stitch*1 3.5 (1/8) 1.4 (1/16) 1-09 For overcasting, 0.0 - 7.0 0.0 - 5.0 (J) mending. (0 - 1/4) (0 - 3/16) Zigzag stitch*1 3.5 (1/8) 1.4 (1/16) 1-10 For overcasting, 0.0 - 7.0 0.0 - 5.0 (J) mending. (0 - 1/4) (0 - 3/16) VARIOUS STITCHES 3 45