Brother International SE2000 Operation Manual - Page 96
Split embroidery patterns
View all Brother International SE2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
Embroidering Select the satin stitch frame pattern of the same shape c as the appliqué. Embroider over the appliqué and base fabric from step b to create the appliqué. Reattach the embroidery frame to the embroidery unit. d Select the satin stitch frame pattern of the same shape e as the appliqué and embroider the satin stitch pattern to create an appliqué. • Do not change the size or position of the pattern. ■ Method 2 Select a straight stitch frame pattern, and embroider a the pattern onto the base fabric. Place the appliqué fabric over the pattern embroidered b in step a and embroider the same pattern on the appliqué fabric. • Be sure that the appliqué fabric completely covers the stitched line. Split embroidery patterns Split embroidery patterns created with PE-DESIGN Ver.7 or later can be embroidered. With split embroidery patterns, embroidery designs larger than the embroidery hoop are divided into multiple sections, which combine to create a single pattern after each section is embroidered. For details on creating split embroidery patterns and for more detailed embroidery instructions, refer to the Instruction manual included with PE-DESIGN Ver.7 or later. Insert the USB flash drive containing the created split a embroidery pattern, and then select the split embroidery pattern to be embroidered. • For details, refer to "Retrieving embroidery patterns" on page 100. Remove the embroidery frame from the embroidery c unit, and cut around the outside of the stitches of the appliqué fabric. Select section to be embroidered and touch . b Note • Do not remove the fabric from the embroidery frame to cut it. Also, do not pull or push on the fabric. Otherwise, the fabric may loosen in the frame. • Select the sections in alphabetical order. Touch c and touch . 94