Canon MultiPASS F80 MultiPASS F80 Basic Guide - Page 38
Removing a memory card
View all Canon MultiPASS F80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
1 Make sure the machine is on. • If not, press [ON/OFF(1 sec.)]. 2 Insert the memory card into the PC card adapter. 3 Insert the PC card adapter all the way into the card slot on the right side of the machine. • The indicator light A turns on. NOTE A • If the memory card cannot be read, check that: - the PC card adapter containing the memory card is inserted all the way into the card slot. - the PC card adapter containing the memory card was not removed while being read. - you are using a compatible memory card. - your memory card contains photographs. Removing a memory card CAUTION • Do not remove the memory card or turn off the machine when the indicator light is blinking as this may damage the data in the memory card. 1 Check that the indicator light is not blinking q, then press [ON/OFF(1 sec.)] w q to turn the machine off w. • If you have been writing to a memory card in Windows 2000, wait a few seconds before turning off the machine. 2 Press [Eject] q and remove the PC card adapter w. • Do not remove the memory card and PC card adapter separately from the card slot. w q 5-2 Photo printing from a memory card-Basic operation Chapter 5