Canon MultiPASS F80 MultiPASS F80 Basic Guide - Page 69

Aligning the printhead

Get Canon MultiPASS F80 PDF manuals and user guides View all Canon MultiPASS F80 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 69 highlights

Aligning the printhead To align the printhead after you have just installed it, follow the procedure in the Setup Sheet. If you have printed the nozzle check pattern ( p. 10-6) and determined that the printhead needs aligning, align it from the operation panel or from the MultiPASS Suite software. Aligning the printhead from the operation panel Follow this procedure to align the printhead from the operation panel: 1 Press [Menu]. 2 Use [2] or [3] to select . 3 Press [Set]. MAINTENANCE 1.NOZZLE CHECK 4 Use [2] or [3] to select . 5 Press [Set]. • The machine prints a horizontal line pattern. CHANGE H VALUE A0 6 In column A on the printout, note which box has the most solid image. Note the value next to this box and use [2] or [3] to enter it. BAD SAMPLE 10 Least solid box Maintenance GOOD SAMPLE Most solid box 7 Press [Set]. 8 Repeat steps 6 and 7 for columns B to F. When all values have been entered, the LCD displays the following: PRINT VERT.PATTERN? YES=(A) NO= (#) 9 Press [T]. Chapter 10 Maintenance 10-7

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
Chapter 10
Maintenance
10-7
10
Maintenance
Aligning the printhead
To align the printhead after you have just installed it, follow the procedure in the
Setup Sheet
.
If you have printed the nozzle check pattern (
²
p. 10-6) and determined that the printhead
needs aligning,align it from the operation panel or from the MultiPASS Suite software.
Aligning the printhead from the operation panel
Follow this procedure to align the printhead from the operation panel:
1
Press [Menu].
2
Use [
2
] or [
3
] to select <MAINTENANCE>.
3
Press [Set].
4
Use [
2
] or [
3
] to select <ALIGN PRINT HEAD>.
5
Press [Set].
•
The machine prints a horizontal line pattern.
6
In column A on the printout, note which box has the most solid image.
Note the value next to this box and use [
2
] or [
3
] to enter it.
7
Press [Set].
8
Repeat steps 6 and 7 for columns B to F.
When all values have been entered, the LCD displays the following:
9
Press [
T
].
PRINT VERT.PATTERN?
YES=(
A
)
NO= (#)
Most solid
box
Least solid
box
BAD SAMPLE
GOOD SAMPLE
CHANGE H VALUE
A
0
MAINTENANCE
1.NOZZLE CHECK