Canon MultiPASS F80 MultiPASS F80 Basic Guide - Page 57

Receiving faxes to your machine Before receiving faxes to your machine Before receiving faxes, check the following: Is the correct paper loaded in the multi-purpose tray? Load plain paper in the multi-purpose tray. For details, see p. 2-2. Have you set the paper size setting? Before receiving faxes, you must set the paper size setting for the paper loaded in the multipurpose tray. For details, see p. 2-7. Have you set the receive mode? Before using your machine to receive faxes, you need to set the receive mode according to how you plan to use your machine. Follow this procedure to set the receive mode: 1 Press [Fax]. 2 Press [Menu]. 3 Press [Set]. Ex: R E C E I V E M O D E FAX/TEL AUTO SW 4 Use [2] or [3] to select the receive mode: • Select: 8 - to receive both faxes and voice calls. - to receive faxes only. - if you have subscribed to a DRP (Distinctive Ring Pattern) service offered by some companies. (If you select this setting, refer to the Comprehensive Guide to set the ring pattern.) - to answer all voice and fax calls manually. - to receive faxes automatically and route voice calls to an answering machine connected to your machine. 5 Press [Set]. • The receive mode will be displayed on the bottom left of the LCD. Ex: 1 2 / 2 7 / 2 0 0 2 F R I 1 5 : 3 0 FaxTel STANDARD Faxing with your machine-Basic operation Have you connected the external devices correctly? Depending on how you plan to use your machine, you may need to connect an external device to it. For details on the different connection combinations, refer to the Setup Sheet. Receiving faxes manually If you have set , follow this procedure to receive a fax manually: 1 Make sure you have set ( above). 2 Make sure you have connected a telephone to your machine ( Setup Sheet). Chapter 8 Faxing with your machine-Basic operation 8-7