Canon MultiPASS F80 MultiPASS F80 Basic Guide - Page 82
Problems receiving faxes
View all Canon MultiPASS F80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Problems receiving faxes See below if you are having problems receiving faxes on the machine. Cannot receive a fax, cannot print a fax. 1. Is there anything displayed in the LCD? If nothing is displayed, see p. 11-14. 2. Is the Alarm light blinking? If it is blinking, see p. 11-17. 3. Is there a warning or attention displayed in the Status Monitor? If displayed, see p. 11-22. 4. Nothing is printed on the printout. Print the nozzle check pattern ( p. 10-6) and check. If the nozzle check pattern does not print properly, see p. 10-5. If the nozzle check pattern does print properly, see the items marked with P in Problems printing from your computer, p. 11-3. 5. In manual receive mode, did you pick up the handset to receive the fax and before replacing the handset, did you press [Start] or dial the remote receiving ID number? If you replace the handset without doing either of these things, the call will disconnect. 6. What receive mode is displayed on the bottom left of the LCD? Have you followed the procedure for that receive mode correctly? 12/03/2002 TUE 15:00 FaxOnly S TA N D A R D Receive mode : Fax calls are received automatically and the telephone rings for voice calls. There are no procedures to follow for receiving faxes. Ringing indicates a voice call so pick up the handset. : The machine automatically receives faxes without ringing. You cannot manually answer calls. : Set this mode if you have subscribed to a DRP (Distinctive Ring Pattern) service offered by some companies. The machine will then ring differently depending on whether a call is a fax or voice call. : The machine rings for both voice and fax calls. If you hear the machine ring, pick up the handset and either press [Start] or dial the remote receiving ID to receive a fax. : Fax calls are received automatically and voice calls are received by the answering machine connected to the machine. There are no procedures to follow for receiving faxes. The answering machine should be left connected. 7. Are there documents in the machine's memory? The memory may be full. Either print or delete documents ( Comprehensive Guide) to free up memory. Then ask the sender to resend the fax. 8. Is the received fax saved on the computer? Has the fax been saved in the My MultiPASS folder on your computer instead of being printed? This will happen if you connect your machine to a computer and set the MultiPASS Suite to save received faxes on your computer. If you want to print faxes as soon as you receive them, do the following: In My MultiPASS, on the MultiPASS menu, point to [Device Setup/Speed Dial], then click [MultiPASS F80]. On the Receive Fax tab, select Print Fax in When Computer is On and When Computer is Off. 9. Was there an error during reception? Print the ACTIVITY REPORT and check for an error ( Comprehensive Guide). 11-10 Troubleshooting Chapter 11