Canon MultiPASS F80 MultiPASS F80 Basic Guide - Page 66
Replacing an ink tank
View all Canon MultiPASS F80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
• Replace ink tanks quickly. Once installed, do not remove from the machine and leave out in the open. Doing so may cause the ink tank not to function when reinstalled in the machine. NOTE • Damage caused by using refilled ink tanks is not covered by Canon's warranty. To ensure optimum printing results and to avoid printing problems, Canon recommends using original Canon ink tanks only. Replacing an ink tank This section describes how to replace an ink tank. Before replacing an ink tank, be sure to read the section When to replace an ink tank ( p. 10-3). CAUTION • Do not replace ink tanks while the machine is printing or performing another operation. Follow this procedure to replace an ink tank: 1 Make sure the power is turned on. 2 Press [Open] q and lift up the scanning unit w. • The printhead holder automatically moves to the center of the machine. CAUTION • Do not try to manually move or stop the printhead holder. • Do not touch any metal parts. w q 3 Press on the tab to release the empty ink tank q, then remove it from its slot w. CAUTION • Do not remove the printhead from the machine. • If several ink tanks need replacing, remove and replace each one individually. IMPORTANT • Discard the empty ink tank immediately according to local laws and regulations for disposal of consumables. • Handle ink tanks carefully to avoid staining clothing or the surrounding area. w q 4 Pull the orange tape in the direction of the arrow and remove the plastic wrapper so you can see the air hole A. Hold the ink tank as shown and remove the protective cap B. • To avoid spilling ink, never press on the long sides of the ink tank C. • Once you remove the cap B, do not touch the ink port D. B A Ink Tank BCI-3eY DC 10-4 Maintenance Chapter 10