Canon imageCLASS MF5770 imageCLASS MF5750/MF5770 Facsimile Guide - Page 53

4 Press [ (-)] or [ (+)] to select ➞ press [Set] twice. 5 Press [ (-)] or [ (+)] to select the time 0 to 30 seconds that the machine takes to check whether a call is fax or voice call ➞ press [Set] twice. 6 Press [ (-)] or [ (+)] to select the length of time 15 to 300 seconds that the machine rings when the call is a voice call ➞ press [Set] twice. Receiving Faxes 7 Press [ (-)] or [ (+)] to select whether the machine switches to receive mode or disconnects the call if no one answers a voice 5 call after the specified time in step 6 ➞ press [Set]. You can select from the following: - to switch to receive mode - to disconnect the call 8 Press [Stop/Reset] to return to the standby display. Receiving When an Answering Machine Is Connected: AnsMode If you want to select , check the following: ■ Select This Mode If: • you only have one telephone line for both fax and telephone use. • you want to receive faxes automatically and receive voice messages on your answering machine. ■ You Will Need to: • set . (See "Setting the Receive Mode," on p. 5-1.) • connect an answering machine to the machine. (See "Connect the telephone cable and necessary external device," in the Set-Up Instructions (for MF5750 users) or Set-Up Instructions for the Machine (for MF 5770 users).) NOTE Follow the guidelines below to adjust the answering machine: 5-4 Setting the Receive Mode