Canon imageCLASS MF7460 imageCLASS MF7400 Series Basic Operation Guide - Page 104
paper size, If you want to select
View all Canon imageCLASS MF7460 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 104 highlights
Copying 5 For the stack bypass setting, load the paper into the stack bypass. The paper size/type setting in the [Stack Bypass] setting screen is available if Stack Bypass Standard Settings is set to [Off] in Common Settings (from the Additional Functions screen). If Stack Bypass Standard Settings is set to [On], copying can be performed only for the registered paper size and type. (See "Stack Bypass Standard Settings," on p. 12‑8.) ˔ If you want to select a standard paper size: 1 ᶃ ᶄ ① Select the desired paper size. ② Press [Next]. To select an A or B series paper size, press [A/B-size]. 2 ᶃ ᶄ ① Select the desired paper type. ② Press [OK]. - When printing on special types of paper, such as heavy paper or transparencies, be sure to correctly set the paper type, especially if you are using heavy paper. If the type of paper is not set correctly, it could adversely affect the quality of the image. Moreover, the fixing unit may become dirty and require a service repair, or the paper could jam. - If you select [Transparency] or [Labels], make sure that you do not specify any Finishing modes (Collate or Group). - [Transparency] can be selected only if [LTR] is selected as the paper size. - [3-hole punch] can be selected only if [LTR] or [LTRR] is selected as the paper size. ˔ If you want to select a nonstandard paper size: 1 3‑7