Canon imageCLASS MF7460 imageCLASS MF7400 Series Basic Operation Guide - Page 56

Before Using the Machine ˔ Values in Inches If you want to enter values in inches in all modes which require a numeric entry, set Inch Entry to [On] in Common Settings (from the Additional Functions screen). (See "Common Settings," on p. 12‑6.) This enables you to enter values in inches when you press [Inch] on a screen requiring a numeric entry or measurement. The default entry mode for numeric values is inches, but you can change it to millimeters by turning the Inch Entry mode [Off ]. The following example shows you how to enter 5 1/2" for X value in the Irregular Size mode. 1 ① Press the keys in the following order: [5], [_], [1], [/], and [2]. - If you make a mistake when entering values, press [C], then enter the correct values. - You can enter only 2, 4, 8, or 16 as the denominator. - The value entered in inches is converted to millimeters by the machine each time it is entered. Thus, there may be a slight difference between the value calculated and the actual value entered. - To enter values in millimeters, press [mm]. 1‑15