Canon imageCLASS MF7460 imageCLASS MF7400 Series Basic Operation Guide - Page 74

Original and Paper On the Platen Glass The machine automatically detects the size of the following originals: 11" x 17", LGL, LTR, and LTRR. 1 Lift the feeder. Place books and other bound originals on the platen glass in the same way. This machine is equipped with an open/close sensor (A) on the feeder (see circled area in the above illustration). When placing originals on the platen glass, lift the feeder high enough so that the sensor does not 3 touch the feeder. If the sensor continues to touch the feeder, the size of the originals may not be detected correctly. When you are enlarging an LTR or STMT original onto 11" x 17" or LGL paper, place the original horizontally on the platen glass, and align it with the LTRR or STMTR marks. Gently close the feeder. 2 Place your original face down. The surface of the original that you want to scan must be placed face down. Align the top edge of your original with the back edge of the platen glass (by the arrow in the top left corner). - Close the feeder gently to avoid catching your hands, as this may result in personal injury. - Do not press down hard on the feeder when using the platen glass to make copies of thick books. Doing so may damage the platen glass and result in personal injury. 2‑7