Canon imageCLASS MF7460 imageCLASS MF7400 Series Basic Operation Guide - Page 89

Original and Paper ˔ If you want to select a standard paper size: 1 ᶃ ᶄ ① Select the desired paper size. ② Press [Next]. To select an A or B series paper size, press [A/B-size]. 2 ᶃ ᶄ ① Select the desired paper type. ② Press [OK]. - When printing on special types of paper, such as heavyweight paper or transparencies, be sure to correctly set the paper type, especially if you are using heavyweight paper. If the type of paper is not set correctly, it could adversely affect the quality of the image. Moreover, the fixing unit may become dirty and require a service repair, or the paper could jam. - If you select [Transparency] or [Labels], make sure that you do not specify any finishing modes (Collate, or Group). - [Transparency] can be selected only if [LTR] is selected as the paper size. ˔ If you want to select a nonstandard paper size: 1 2 ᶃ ᶄ ᶅ ① Press [X] to specify the horizontal axis of the paper, then enter a value using the numeric keys on the touch panel display. ② Press [Y] to specify the vertical axis of the paper, then enter a value using the numeric keys on the touch panel display. ③ Press [OK]. - If you make a mistake when entering values, press [C] on the touch panel display, then enter the correct values. - You can enter only 2, 4, 8 or 16 as the denominator. - The value entered in inches is converted to millimeters by the machine each time it is entered. Thus, there may be a slight difference between the value calculated and the actual value entered. - To enter values in millimeters, press [mm]. - When entering the value in millimeters, you can also use - (numeric keys), and (Clear) to clear your entry. 2‑22