Canon imageCLASS MF7460 imageCLASS MF7400 Series Basic Operation Guide - Page 344

Communications Settings Received Page Footer Continue Printing When Toner Is Out Fax Settings User Settings Unit Telephone # Tel Line Type Monitor Volume Control TX Settings ECM TX Pause Time Sets whether to insert the machine's fax number and the sender information on received faxes. - Off - On Sets whether the machine continues printing received documents and reports when it is running out of toner. If you set the machine not to continue printing, the machine stops printing when the toner starts to run out, and automatically stores the received documents in memory. - Off - On Sets the fax features. Specifies the basic operation settings in the fax mode. Registers your fax number (max. 20 characters, including spaces). (See "Set the Machine for Sending Documents," in the Starter Guide.) Selects the telephone line type. (See "Set the Machine for Sending Documents," in the Starter Guide.) - Pulse - Tone Sets the volume for the monitor tone that this machine sounds during a fax transmission. Sets the transmission features. Sets whether the ECM (Error Correction Mode) transmission is activated. - On - Off Sets the pause time when you insert pause into the dialing sequence. (1sec−15sec) Machine Settings 12‑15