Canon imageCLASS MF7460 imageCLASS MF7400 Series Basic Operation Guide - Page 114

Copying 4 5 Select the paper size. ᶃ - If you set [Auto] for [Paper Select], the machine selects the paper best suitable to ᶄ the selected ratio. - If you copy highly transparent originals, ① Press [-] or [+] to set a copy ratio. ② Press [Done]. such as transparencies, the correct paper size may not be selected. You can also use - (numeric keys) to enter values, and (Clear) to clear your 6 Press (Start). entries. You can change the value by pressing [-] or [+], even if you have entered the value using - (numeric keys). - To return the copy ratio to 100%, press [Direct]. - To cancel all settings and return the If you enter a value outside the setting range, a message prompting you to enter an machine to the Standard mode, press (Reset). appropriate value appears on the screen. ˔ Auto Zoom You can set the machine to automatically select the appropriate copy ratio based on the size of the original and the selected copy paper. The same copy ratio is used for the horizontal (X) and vertical (Y) axes. The available copy ratios are from 50% to 200%. - You cannot use the Auto setting on the Copy Ratio screen with the Automatic Paper Selection mode. - You cannot copy highly transparent originals, such as transparencies, using the Auto setting on the Copy Ratio screen. Use the Preset Zoom or Zoom by Percentage mode instead. - To use the Auto setting on the Copy Ratio screen, your originals must conform to one of the standard paper sizes: - 11" x 17", LGL, LTR, LTRR, STMT or STMTR (You can only place an STMTR original on the platen glass.) 1 Press (COPY). 3 2 Place your originals. 3‑17