Canon imageCLASS MF7460 imageCLASS MF7400 Series Basic Operation Guide - Page 105

Copying 2 4 ᶃ ① Press [X] to specify the horizontal axis of the paper, then enter a value. ② Press [Y] to specify the vertical axis of the paper, then enter a value. ③ Press [OK]. - If you make a mistake when entering values, press [C] on the touch panel display, then enter the correct values. - To enter values in millimeters, press [mm]. - If you enter values outside the setting range, [OK] is grayed out and cannot be selected. Enter an appropriate value. - You can adjust values for [X] between 5 7/8" and 17", and for [Y] between 3 3/4" and 11 11/16". 3 ᶄ ① Select the desired paper type. ② Press [OK]. - When printing on special types of paper, such as heavy paper, be sure to correctly set the paper type, especially if you are using heavy paper. If the type of paper is not set correctly, it could adversely affect the quality of the image. Moreover, the fixing unit may become dirty and require a service repair, or the paper could jam. - If you select [Irreg. Size] for copying, you cannot use the Rotate Collate, Rotate Group, 1 ▶ 2-Sided, 2 ▶ 2-Sided, Book ▶ 2-Sided, 2-Page Separation, Image Combination mode. ˔ If you want to select an envelope size: 1 3‑8