Canon imageCLASS MF7460 imageCLASS MF7400 Series Basic Operation Guide - Page 300
display, and remove any jammed, indicated on the touch panel
View all Canon imageCLASS MF7460 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 300 highlights
- When removing paper which has become jammed inside the machine, take care not to allow the toner on the jammed paper to come into contact with your hands or clothing, as this will dirty your hands or clothing. If they become dirty, wash them immediately with cold water. Washing them with warm water will set the toner and make it impossible to remove the toner stains. - When removing paper which has become jammed inside the machine, remove the jammed paper gently to prevent the toner on the paper from scattering and getting into your eyes or mouth. If the toner gets into your eyes or mouth, wash them immediately with cold water and immediately consult a physician. - After clearing all paper jams, remove your hands from the machine immediately. Even if the machine is not in operation, your hands, hair, or clothing may get caught in the feed rollers, which could result in personal injury or damage if the machine suddenly starts printing. - Do not force a jammed original or paper out of the machine. Contact Canon Customer Care Center if needed. - When a paper jam occurs in the feeder, you cannot continue operating the machine. Follow the instructions on the touch panel display to remove the jammed paper. (See "Feeder," on p. 11‑5.) - If paper is jammed in several locations, remove the jammed paper in the order indicated on the touch panel display. Troubleshooting 1 Inspect all paper jam locations indicated on the touch panel display, and remove any jammed paper. See the appropriate pages below for instructions on finding and removing jammed paper. Or, you can follow the instructions on the touch panel display. If jammed paper tears while it is being removed, be sure to remove any remaining pieces from inside the machine. - If the machine's power is turned off when there is a paper jam, detection of paper jams in the paper drawers is not possible after the power is turned back on. Clear paper jams without turning the power off. - Some areas that are shown to have paper jams may not actually have paper jams. However, always check all locations 2 indicated on the touch panel display in the order that is given. - When paper is jammed in several locations, the following image with the black circles appears on the screen. ① Feeder (See "Feeder," on p. 11‑5.) ② Stack Bypass (See "Stack Bypass," on p. 11‑7.)/Fixing Unit (See "Fixing Unit (Inside the Main Unit)," on p. 11‑8.) ③ Duplex Unit (See "Duplex Unit," on p. 11‑11.) ④ Paper Drawer 1 (See "Paper Drawer 1," on p. 11‑13.) ⑤ Paper Drawer 2 (See "Paper Drawer 2," on p. 11‑15.) After you have removed all of the jammed paper in the locations indicated on the touch panel display, restore all levers and covers to their original positions. 11‑3