Canon imageCLASS MF7460 imageCLASS MF7400 Series Basic Operation Guide - Page 83
Open the stack bypass., Adjust the slide guides A to, match the size of the paper.
View all Canon imageCLASS MF7460 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
Original and Paper 1 Open the stack bypass. 3 Load the paper into the stack bypass. Make sure that the height of the paper stack does not exceed the loading limit mark ( ). If the paper size you are going to load into the stack bypass is different from the paper size stored in Stack Bypass Standard Settings, set Stack Bypass Standard Settings to [Off] in Common Settings (from the Additional Functions screen). (See "Setting Paper Size and Type for the Stack Bypass," on p. 2‑21.) 2 Adjust the slide guides (A) to match the size of the paper. If you are feeding large size paper, pull out the auxiliary tray (A), and extend the tray extension (B). When you use the stack bypass to make copies, straighten out curled paper prior to use, as shown below. Feeding Direction Curled paper may cause a paper jam. - If there is difficulty in straightening out curled paper, curl the front edges of the paper upward, as shown below. 2‑16