Canon imageCLASS MF7460 imageCLASS MF7400 Series Basic Operation Guide - Page 80
‑13, Note the following points when using the stack bypass
View all Canon imageCLASS MF7460 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
Original and Paper ˔ To prevent paper jams, do not use any of the following: - Wrinkled or creased paper - Curled or rolled paper - Coated paper - Torn paper - Damp paper - Very thin paper - Paper which has been printed on using a thermal transfer printer (Do not copy on the reverse side.) ˔ The following types of paper do not print well: - Highly textured paper - Very smooth paper - Shiny paper ˔ Make sure the paper is free from dust, lint, and oil stains. ˔ Be sure to test paper before purchasing large quantities. ˔ Store all paper wrapped and on a flat surface until ready for use. Keep opened packs in their original packaging in a cool, dry location. ˔ Store paper at 64.4°F-75.2°F (18°C-24°C), 40%-60% relative humidity. ˔ Use only the transparencies designed for laser printers. Canon recommends you to use Canon type transparencies with this machine. ˔ Each paper drawer holds approximately 250 sheets of paper (22 lb bond (80 g/m2)). ˔ Note the following points when using the stack bypass: - Paper Quantity: one to approximately 80 sheets (22 lb bond (80 g/m2), stack approximately 3/8" (10 mm) high) - Paper Size: 3 3/4" x 5 7/8" to 11 3/4" x 17" (95 mm x 148 mm to 297 mm x 432 mm) - Paper Weight: 18 to 32 lb bond (64 to 128 g/m2) - Paper which has been rolled or curled must be straightened out prior to use, to allow the paper to feed smoothly through the stack bypass (allowable curl amount: less than 3/8" (10 mm) for normal paper, less than 1/4" (5 mm) for heavyweight paper). There are some types of paper stock which may meet the above specifications, but cannot be fed into the stack bypass. ˔ You can select standard inch paper, or A or B series paper. 2‑13