Cisco 7970G Administration Guide - Page 106

Network Configuration Menu Chapter 4 Configuring Settings on the Cisco Unified IP Phone Table 4-2 Network Configuration Menu Options (continued) Option Alternate TFTP SW Port Configuration Description To Change Indicates whether the phone is using an alternative 1. Unlock network TFTP server. configuration options. 2. Scroll to the Alternate TFTP option and press the Yes softkey if the phone should use an alternative TFTP server. 3. Press the Save softkey. Speed and duplex of the network port (labeled 10/100 SW on the Cisco Unified IP Phone 7970, and 10/100/1000 SW on the Cisco Unified IP Phone 7971G-GE). Valid values: • Auto Negotiate • 10 Half-10-BaseT/half duplex • 10 Full-10-BaseT/full duplex • 100 Half-100-BaseT/half duplex • 100 Full-100-BaseT/full duplex • 1000 Full-1000-BaseT/full duplex 1. Unlock network configuration options. 2. Scroll to the SW Port Configuration option and then press the Edit softkey. 3. Scroll to the setting that you want and then press the Select softkey. 4. Press the Save softkey. If the phone is connected to a switch, configure the port on the switch to the same speed/duplex as the phone, or configure both to auto-negotiate. If you change the setting of this option, you must change the PC Port Configuration option to the same setting. 4-14 Cisco Unified IP Phone 7970G/7971G-GE Administration Guide for Cisco Unified Communications Manager 6.1 OL-14626-01