Cisco 7970G Administration Guide - Page 143
X Authentication and Status
UPC - 746320926292
View all Cisco 7970G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 143 highlights
Chapter 4 Configuring Settings on the Cisco Unified IP Phone Security Configuration Menu Table 4-20 Trust List Menu Settings Option Communications Manager / TFPT Server CAPF Server SRST Router Description To Change IP address of a Cisco Unified Communications Manager and TFTP server used by the phone. Also displays a certificate icon if a certificate is installed for this server. For more information about these settings, refer to the "Configuring the Cisco CTL Client" section in Cisco Unified Communications Manager Security Guide. IP address of the CAPF used by the phone. Also displays a certificate icon if a certificate is installed for this server. For more information about these settings, refer to the "Configuring the Cisco CTL Client" section in Cisco Unified Communications Manager Security Guide. IP address of the trusted SRST router that is available to the phone, if such a device has been configured in Cisco Unified Communications Manager Administration. Also displays a certificate icon if a certificate is installed for this server. For more information about these settings, refer to the "Configuring the Cisco CTL Client" section in Cisco Unified Communications Manager Security Guide. 802.1X Authentication and Status The 802.1X Authentication and 802.1X Authentication Status menus allow you to enable 802.1X authentication and monitor its progress. These options are described in Table 4-21 and Table 4-22. You can access the 802.1X Authentication settings by pressing the Settings button and choosing Security Configuration > 802.1X Authentication. To exit this menu, press the Exit softkey. Cisco Unified IP Phone 7970G/7971G-GE Administration Guide for Cisco Unified Communications Manager 6.1 OL-14626-01 4-51