Cisco 7970G Administration Guide - Page 107

Chapter 4 Configuring Settings on the Cisco Unified IP Phone Network Configuration Menu Table 4-2 Network Configuration Menu Options (continued) Option PC Port Configuration PC VLAN Description To Change Speed and duplex of the access port (labeled 10/100 PC on the Cisco Unified IP Phone 7970, and 10/100/1000 PC on the Cisco Unified IP Phone 7971G-GE). Valid values: • Auto Negotiate • 10 Half-10-BaseT/half duplex • 10 Full-10-BaseT/full duplex • 100 Half-100-BaseT/half duplex • 100 Full-100-BaseT/full duplex 1. Unlock network configuration options. 2. Scroll to the PC Port Configuration option and then press the Edit softkey. 3. Scroll to the setting that you want and then press the Select softkey. 4. Press the Save softkey. • 1000 Full-1000-BaseT/full duplex If the phone is connected to a switch, configure the port on the switch to the same speed/duplex as the phone, or configure both to auto-negotiate. If you change the setting of this option, you must change the SW Port Configuration option to the same setting. Allows the phone to interoperate with 3rd party switches that do not support a voice VLAN. The Admin VLAN ID option must be set before you can change this option. 1. Unlock network configuration options. 2. Make sure the Admin VLAN ID option is set. 3. Scroll to the PC VLAN option, press the Edit softkey, and then enter a new PC VLAN setting. 4. Press the Validate softkey and then press the Save softkey. Related Topics • Displaying a Configuration Menu, page 4-3 • Unlocking and Locking Options, page 4-4 Cisco Unified IP Phone 7970G/7971G-GE Administration Guide for Cisco Unified Communications Manager 6.1 OL-14626-01 4-15