Cisco 7970G Administration Guide - Page 128

Device Configuration Menu Chapter 4 Configuring Settings on the Cisco Unified IP Phone Table 4-12 Media Configuration Menu Options (continued) Option Enterprise Advertise G.722 Codec Device Advertise G.722 Codec Description To Change Enables/disables Cisco Unified IP Use Cisco Unified Communications Phones to advertise the G.722 codec to Manager Administration and choose Cisco Unified Communications System > Enterprise Parameters. Manager. If enabled (default), and if each endpoint in the attempted call supports G.722 in its capabilities set, Cisco Unified Communications Manager will choose G.722 for the call. Note When a phone is registered with a Cisco Unified Communications Manager that does not support this setting, the default is "Disabled." Allows you to override the Enterprise Use Cisco Unified Communications Advertise G.722 Codec on a per-phone Manager Administration and choose basis. Device > Phone. The default is "Use System Default," which means the value configured for the Enterprise Advertise G.722 Codec parameter gets used. Power Save Configuration Menu The Power Save Configuration menu displays the settings that control when the LCD screen on a phone turns off to conserve power. Table 4-13 describes the options on this menu. For detailed information about configuring these settings, see the "Automatically Disabling the Cisco Unified IP Phone Touchscreen" section on page 6-11. 4-36 Cisco Unified IP Phone 7970G/7971G-GE Administration Guide for Cisco Unified Communications Manager 6.1 OL-14626-01