Cisco 7970G Administration Guide - Page 118
NTP Configuration Menu (SIP Phones Only), Table 4-10, Only
UPC - 746320926292
View all Cisco 7970G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 118 highlights
Device Configuration Menu Chapter 4 Configuring Settings on the Cisco Unified IP Phone Table 4-9 Locale Configuration Menu Options (continued) Option Description To Change Network Locale Network locale associated with the phone user. The network locale identifies a set of detailed information that supports the phone in a specific location, including definitions of the tones and cadences used by the phone. From Cisco Unified Communications Manager Administration, choose Device > Phone > Phone Configuration. Network Locale Version Version of the network locale loaded on Display only-Cannot configure. the phone. NTP Configuration (SIP phones only) Provides access to the NTP Configuration Menu. For more information, see the "NTP Configuration Menu (SIP Phones Only)" section on page 4-26 Display only-Cannot configure. NTP Configuration Menu (SIP Phones Only) The NTP Configuration menu displays information about the NTP server and mode configuration used by SIP phones. Table 4-10 describes the options on this menu. Table 4-10 NTP Configuration Menu Options Option NTP Server 1 NTP Server 2 NTP Mode 1 NTP Mode 2 Description To Change IP address of the primary NTP server. Display only-Cannot configure. IP address of the secondary or backup Display only-Cannot configure. NTP server. Primary server mode. Supported modes Display only-Cannot configure. are Directed Broadcast and Unicast. Secondary server mode. Supported modes are Directed Broadcast and Unicast. Display only-Cannot configure. 4-26 Cisco Unified IP Phone 7970G/7971G-GE Administration Guide for Cisco Unified Communications Manager 6.1 OL-14626-01