Cisco 7970G Administration Guide - Page 188

Automatically Disabling the Cisco Unified IP Phone Touchscreen Chapter 6 Customizing the Cisco Unified IP Phone Table 6-1 Display On and Off Configuration Fields Field Description Days Display Not Days that the display does not turn on automatically at the Active time specified in the Display On Time field. Choose the day or days from the drop-down list. To choose more than one day, Ctrl-click each day that you want. Display On Time Time each day that the display turns on automatically (except on the days specified in the Days Display Not Active field). Enter the time in this field in 24 hour format, where 0:00 is midnight. For example, to automatically turn the display on at 7:00 a.m., (0700), enter 7:00. To turn the display on at 2:00 p.m. (1400), enter 14:00. If this field is blank, the display will automatically turn on at 0:00. Display On Duration Length of time that the display remains on after turning on at the time specified in the Display On Time field. Enter the value in this field in the format hours:minutes. For example, to keep the display on for 4 hours and 30 minutes after it turns on automatically, enter 4:30. If this field is blank, the phone will turn off at the end of the day (0:00). Note If Display On Time is 0:00 and the display on duration is blank (or 24:00), the display will remain on continuously. 6-12 Cisco Unified IP Phone 7970G/7971G-GE Administration Guide for Cisco Unified Communications Manager 6.1 OL-14626-01