Cisco 7970G Administration Guide - Page 228

Streaming Statistics Chapter 8 Monitoring the Cisco Unified IP Phone Remotely To display a Streaming Statistics area, access the web page for the phone as described in the "Accessing the Web Page for a Phone" section on page 8-2, and then click the Stream 1, the Stream 2, or the Stream 3 hyperlink. Table 8-5 describes the items in the Streaming Statistics areas. Table 8-5 Streaming Statistics Area Items Item Remote Address Local Address Start Time Stream Status Host Name Sender Packets Sender Octets Sender Codec Sender Reports Sent1 Sender Report Time Sent1 Description IP address and UDP port of the destination of the stream. IP address and UPD port of the phone. Internal time stamp indicating when Cisco Unified Communications Manager requested that the phone start transmitting packets. Indication of whether streaming is active or not. Unique, fixed name that is automatically assigned to the phone based on its MAC address. Total number of RTP data packets transmitted by the phone since starting this connection. The value is 0 if the connection is set to receive only mode. Total number of payload octets transmitted in RTP data packets by the phone since starting this connection. The value is 0 if the connection is set to receive only mode. Type of audio encoding used for the transmitted stream. Number of times the RTCP Sender Reports have been sent. Internal time stamp indicating when a RTCP Sender Report was sent. 8-16 Cisco Unified IP Phone 7970G/7971G-GE Administration Guide for Cisco Unified Communications Manager 6.1 OL-14626-01