Cisco 7970G Administration Guide - Page 223

Chapter 8 Monitoring the Cisco Unified IP Phone Remotely Network Statistics Table 8-2 Network Configuration Area Items (continued) Item Description CDP: SW Port Indicates whether CDP is supported on the switch xport. LLDP-MED: SW Port Indicates whether Link Layer Discovery Protocol Media Endpoint Discovery (LLDP-MED) is enabled on the switch port. LLDP: PC Port Indicates whether Link Layer Discovery Protocol (LLDP) is enabled on the PC port. LLDP Power Priority Advertises the phone's power priority to the switch, enabling the switch to appropriately provide power to the phones. Settings include: • Unknown-default • Low • High • Critical LLDP Asset ID Identifies the asset ID assigned to the phone for inventory management. Network Statistics These network statistics areas on a phone's web page provide information about network traffic on the phone: • Ethernet Information area-Displays information about Ethernet traffic. Table 8-3 describes the items in this area. • Access area-Displays information about network traffic to and from the PC port on the phone. Table 8-4 describes the items in this area. • Network area-Displays information about network traffic to and from the network port on the phone. Table 8-4 describes the items in this area. To display a network statistics area, access the web page for the phone as described in the "Accessing the Web Page for a Phone" section on page 8-2, and then click the Ethernet Information, the Access, and or the Network hyperlink. Cisco Unified IP Phone 7970G/7971G-GE Administration Guide for Cisco Unified Communications Manager 6.1 OL-14626-01 8-11