Cisco 7970G Administration Guide - Page 75

Chapter 3 Setting Up the Cisco Unified IP Phone Understanding the Cisco Unified IP Phone 7970 Series Components If you plan to use auto-registration, verify that it is enabled and properly configured in Cisco Unified Communications Manager before connecting any Cisco Unified IP Phone to the network. For information about enabling and configuring auto-registration, refer to Cisco Unified Communications Manager Administration Guide. Also, see the "Adding Phones to the Cisco Unified Communications Manager Database" section on page 2-13. You must use Cisco Unified Communications Manager to configure and assign telephony features to the Cisco Unified IP Phones. See the "Telephony Features Available for the Phone" section on page 5-2 for details. In Cisco Unified Communications Manager, you can add users to the database and associate them with specific phones. In this way, users gain access to web pages that allow them to configure items such as call forwarding, speed dialing, and voice messaging system options. See the "Adding Users to Cisco Unified Communications Manager" section on page 5-27 for details. Understanding the Cisco Unified IP Phone 7970 Series Components The Cisco Unified IP Phone 7970 Series includes these components on the phone or as accessories for the phone: • Network and Access Ports, page 3-3 • Handset, page 3-4 • Speakerphone, page 3-4 • Headset, page 3-5 Network and Access Ports The back of the Cisco Unified IP Phone includes these ports: • Network port-Labeled 10/100 SW on the Cisco Unified IP Phone 7970G and 10/100/1000 SW on the Cisco Unified IP Phone 7971G-GE • Access port-Labeled 10/100 PC on the Cisco Unified IP Phone 7970G and 10/100/1000 PC on the Cisco Unified IP Phone 7971G-GE Cisco Unified IP Phone 7970G/7971G-GE Administration Guide for Cisco Unified Communications Manager 6.1 OL-14626-01 3-3