Cisco 7970G Administration Guide - Page 219

Chapter 8 Monitoring the Cisco Unified IP Phone Remotely Network Configuration Table 8-2 Network Configuration Area Items (continued) Item Description Operational VLAN ID Auxiliary Virtual Local Area Network (VLAN) configured on a Cisco Catalyst switch in which the phone is a member. Admin. VLAN ID Auxiliary VLAN in which the phone is a member. Communications Manager 1-5 Host names or IP addresses, in prioritized order, of the Cisco Unified Communications Manager servers with which the phone can register. An item can also show the IP address of an SRST router that is capable of providing limited Cisco Unified Communications Manager functionality, if such a router is available. For an available server, an item will show the Cisco Unified Communications Manager server IP address and one of the following states: • Active-Cisco Unified Communications Manager server from which the phone is currently receiving call-processing services. • Standby-Cisco Unified Communications Manager server to which the phone switches if the current server becomes unavailable. • Blank-No current connection to this Cisco Unified Communications Manager server. An item may also include the Survivable Remote Site Telephony (SRST) designation, which identifies an SRST router capable of providing Cisco Unified Communications Manager functionality with a limited feature set. This router assumes control of call processing if all other Cisco Unified Communications Manager servers become unreachable. The SRST Cisco Unified Communications Manager always appears last in the list of servers, even if it is active. You configure the SRST router address in the Device Pool section in Cisco Unified Communications Manager Configuration window. Cisco Unified IP Phone 7970G/7971G-GE Administration Guide for Cisco Unified Communications Manager 6.1 OL-14626-01 8-7