Cisco SPA1001 Administration Guide - Page 103

Chapter 5 Linksys ATA Field Reference Regional Tab This section describes the fields for the following headings on the Regional tab: • Call Progress Tones, page 5-19 • Distinctive Ring Patterns, page 5-21 • Distinctive Call Waiting Tone Patterns, page 5-21 • Distinctive Ring/CWT Pattern Names, page 5-22 • Ring and Call Waiting Tone Spec, page 5-23 • Control Timer Values (sec), page 5-23 • Vertical Service Activation Codes, page 5-24 • Vertical Service Announcement Codes, page 5-28 • Outbound Call Codec Selection Codes, page 5-28 • Miscellaneous, page 5-30 Call Progress Tones Regional Tab Field Dial Tone Second Dial Tone Outside Dial Tone Prompt Tone Busy Tone Reorder Tone Off Hook Warning Tone Description Prompts the user to enter a phone number. Reorder Tone is played automatically when or any of its alternatives times out. The default is 350@-19,440@-19;10(*/0/1+2). Alternative to the Dial Tone when the user dials a three-way call. The default is 420@-19,520@-19;10(*/0/1+2). Alternative to the Dial Tone. It prompts the user to enter an external phone number, as opposed to an internal extension. It is triggered by a, (comma) character encountered in the dial plan. The default is 420@-19;10(*/0/1). Prompts the user to enter a call forwarding phone number. The default is 520@-19,620@-19;10(*/0/1+2). Played when a 486 RSC is received for an outbound call. The default is 480@-19,620@-19;10(.5/.5/1+2). Played when an outbound call has failed or after the far end hangs up during an established call. Reorder Tone is played automatically when or any of its alternatives times out. The default is 480@-19,620@-19;10(.25/.25/1+2). Played when the caller has not properly placed the handset on the cradle. Off Hook Warning Tone is played when Reorder Tone times out. The default is 480@10,620@0;10(.125/.125/1+2). Document Version 3.2 Linksys IP Phone Administrator Guide 5-19