Cisco SPA1001 Administration Guide - Page 66
Example SAS with MOH
View all Cisco SPA1001 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Configuring a Streaming Audio Server Chapter 3 Configuring Linksys ATAs If the Linksys ATA boots and finds that the SAS line is on-hook, it will not remove battery from the line so that IVR may be used. But if the Linksys ATA boots up and finds that the SAS line is off-hook, it will remove battery from the line because no audio session is in progress. Example SAS with MOH Figure 1-15 MOH Application with a Linksys ATA Line Configured as an SAS SPA1: IP=192.168.2.100 UserID[1]=1001, SIP Port[1]=5060 UserID[1]=1002, SIP Port[1]=5061 SPA2: IP=192.168.2.200 UserID[1]=2001, SIP Port[1]=5060 UserID[1]=2002, SIP Port[1]=5061 Phone 1 Phone 2 IP Network Phone 1 Phone 2 Media signal adapter Line in Music source The following configuration examples are based on the configuration shown in Figure 1-15. SAS Line Registered with the Proxy Server In this example, the SAS Line is registered with the Proxy Server as the other subscribers. On Linksys ATA 1: SAS Enable[1] = no MOH Server [1] = 1002 SAS Enable[2] = yes On Linksys ATA 2: SAS Enable[1] = no MOH Server [1] = 1002 SAS Enable[2] = no MOH Server [2] = 1002 SAS Line Not Registered with the Proxy Server In this example, the SAS Line is not registered with the Proxy Server for the other subscribers. On Linksys ATA 1: 3-14 Linksys ATA Administrator Guide Document Version 3.1