Cisco SPA1001 Administration Guide - Page 166

Enhanced Services Disable or Cancel Call Waiting Appendix C User Guidelines Service description User action required to activate or use Expected call and network behavior User action required to deactivate or end The SPA supports disabling of call waiting permanently or on a per-call basis. To temporarily disable Call Waiting (for the length of one call) do the following before placing a call: 1. Lift Receiver 2. Press *70 3. Listen for dial tone, then dial the number you want to call. Call Waiting is now disabled for the duration of this call only. To deactivate Call Waiting while on a call: 1. Press the switch hook or flash button briefly. This puts the first call on hold. 2. Listen for three short tones and then a dial tone. 3. Press *70 4. Listen for dial tone then return to your call by pressing the switch hook or flash button. Call Waiting is now disabled for the duration of this call. To deactivate Call Waiting while on a permanent basis (until cancelled): 1. Lift the receiver 2. Listen for dial tone 3. Press *57 You will hear a confirmation tone signaling your request to cancel Call Waiting has been accepted. Callers who dial your number receive a busy signal, or the caller is forwarded to voice mail or another predetermined forwarding number, if available. If you have cancelled Call Waiting temporarily, no user action is required. If you deactivated call waiting and wish to reinstate the service, do the following: 1. Lift the receiver 2. Listen for dial tone 3. Press *57 You will hear a confirmation tone signaling your request to cancel Call Waiting has been accepted. Linksys ATA Administrator Guide C-4 Document Version 3.01