Cisco SPA1001 Administration Guide - Page 138
Subscriber Information SPA3102/AG310
View all Cisco SPA1001 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 138 highlights
PSTN Line Tab Field Proxy Fallback Intvl Proxy Redundancy Method Chapter 5 Linksys ATA Field Reference Description This parameter sets the delay (sec) after which the PAP2T will retry from the highest priority proxy (or outbound proxy) servers after it has failed over to a lower priority server. This parameter is useful only if the primary and backup proxy server list is provided to the PAP2T via DNS SRV record lookup on the server name. (Using multiple DNS A record per server name does not allow the notion of priority and so all hosts will be considered at the same priority and the PAP2T will not attempt to fall back after a fail over). The default is 3600 PAP2T will make an internal list of proxies returned in DNS SRV records. In normal mode this list will contain proxies ranked by weight and priority. if Based on SRV port is configured the PAP2T does normal first, and also inspect the port number based on 1st proxy's port on the list. The default is Normal. Subscriber Information (SPA3102/AG310) Field Display Name User ID Password Use Auth ID Auth ID Call Capacity Mini Certificate SRTP Private Key Description Display name for caller ID. Extension number for this line. Password for this line. To use the authentication ID and password for SIP authentication, select yes. Otherwise, select no to use the user ID and password. The default is no. Authentication ID for SIP authentication. Maximum number of calls allowed on this line interface. Choices: {unlimited,1,2,3,...25 }. Default is 16. Note that the Linksys IP phone does not distinguish between incoming and outgoing calls when talking about call capacity. Note: unlimited = 16 Base64 encoded of Mini-Certificate concatenated with the 1024-bit public key of the CA signing the MC of all subscribers in the group. The default is empty. Base64 encoded of the 512-bit private key per subscriber for establishment of a secure call. The default is empty. 5-54 Linksys IP Phone Administrator Guide Document Version 3.2