Cisco SPA1001 Administration Guide - Page 56
Provisioning
View all Cisco SPA1001 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Provisioning Reboot URL The Reboot URL lets you reboot the Linksys ATA. Note The Linksys ATA reboots only when it is idle. The Reboot URL is http://spa-ip-addr/admin/reboot. Chapter 3 Configuring Linksys ATAs Provisioning This section describes the provisioning functionality of the Linksys ATA. This section includes the following topics: • Provisioning Capabilities, page 3-4 • Configuration Profile, page 3-4 For detailed information about provisioning the Linksys ATA, refer to the Linksys SPA Provisioning Guide. Provisioning Capabilities The Linksys ATA provides for secure provisioning and remote upgrade. Provisioning is achieved through configuration profiles transferred to the device via TFTP, HTTP, or HTTPS. The Linksys ATA can be configured to automatically resync its internal configuration state to a remote profile periodically and on power up. The automatic resyncs are controlled by configuring the desired profile URL into the device. The Linksys ATA accepts profiles in XML format, or alternatively in a proprietary binary format, which is generated by a profile compiler tool available from Linksys. The Linksys ATA supports up to 256-bit symmetric key encryption of profiles. For the initial transfer of the profile encryption key (initial provisioning stage), the Linksys ATA can receive a profile from an encrypted channel (HTTPS with client authentication), or it can resync to a binary profile generated by the Linksys-supplied profile compiler. In the latter case, the profile compiler can encrypt the profile specifically for the target Linksys ATA, without requiring an explicit key exchange. Remote firmware upgrade is achieved via TFTP or HTTP (firmware upgrades using HTTPS are not supported). Remote upgrades are controlled by configuring the desired firmware image URL into the Linksys ATA via a remote profile resync. For further information about remote provisioning refer to the Linksys SPA Provisioning Guide. Configuration Profile The Linksys ATA configuration profile can be either an XML file or a binary file with a proprietary format. The XML file consists of a series of elements (one per configuration parameter), encapsulated within the element tags ... . The encapsulated elements specify values for individual parameters. Here is an example of a valid XML profile: some secret Linksys ATA Administrator Guide 3-4 Document Version 3.1