Cisco SPA1001 Administration Guide - Page 48
After you hear Option Successful - manual
View all Cisco SPA1001 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Using the Interactive Voice Response Interface Table 1-25 IVR Options (continued) Set Network Mask 121 Check Static Gateway IP 130 Address Set Static Gateway IP 131 Address Check MAC Address 140 Check Firmware Version 150 Check Primary DNS 160 Server Setting Set Primary DNS Server 161 Check administration 170 web server port Check LAN IP Address 210 Check PBX multicast 180 address Set PBX multicast 181 address Enable/Disable administration web server Manual Reboot of Unit 7932 732668 Chapter 2 Getting Started Enter value using numbers on the telephone key pad. Use the * (star) key when entering a decimal point. DHCP must be "Disabled," otherwise you hear, "Invalid Option," if you try to set this value. Requires password None IVR announces the current gateway IP address of the Linksys ATA. Enter IP address using numbers on the telephone key pad. Use the * (star) key when entering a decimal point. DHCP must be "Disable," otherwise you hear, "Invalid Option," if you try to set this value. Requires password None IVR announces the MAC address of Linksys ATA in hex string format. None IVR announces the version of the firmware running on the Linksys ATA. None IVR announces the current setting in the parameter. Enter IP address using numbers on the telephone key pad. Use the * (star) key when entering a decimal point. Requires password None IVR announces the port that the web server is listening on. (Default is 80) None IVR announces the current IP address of the LAN port. None IVR announces the current value. Enter IP address and port. Use * key for entering a dot. For example, 224.168.168.169:8089 is 224*168*168*169*8089. Enter 1 to enable Enter 0 to disable Enter a * between the IP address and the Port fields. Requires Password Requires password None After you hear "Option Successful," hang up. Unit reboots automatically. 2-20 Linksys ATA Administrator Guide Document Version 3.1