Cisco SPA1001 Administration Guide - Page 50

Using the Administration Web Server

Page 50 highlights

Using the Administration Web Server Chapter 2 Getting Started For example, to input password test#@1234 by phone keypad, you need to press the following sequence of digits: 8378001234. 1. After entering a value, press the # (pound) key to indicate end of input. - To save value, press 1. - To review the value, press 2. - To re-enter the value, press 3. - To cancel the value entry and return to the main configuration menu, press *' (star). Notes: - The final # key is not included in the password value. - Saved settings take effect when the telephone is hung-up, and if necessary, the Linksys ATA automatically reboots. 2. After one minute of inactivity, the unit times out. The user needs to re-enter the configuration menu from the beginning by pressing * * * *. Using the Administration Web Server This section describes how to use the administration web server to configure the Linksys ATA. It includes the following topics: • Connecting to the Administration Web Server, page 2-22 • Administrator Account Privileges, page 2-23 Connecting to the Administration Web Server To access the Linksys ATA administration web server, perform the following steps. Step 1 Step 2 Step 3 Launch a web browser on a computer connected to the Linksys ATA. You access the administration web server through the Internet (WAN) interface on the Linksys ATA. Determine the address of the administration web server. a. Connect an analog telephone to the Phone 1 or Phone 2 port on the Linksys ATA. b. Press **** on the keypad to access the IVR menu. c. Press 110# to determine the Internet (WAN) IP address. Direct the browser to the IP address of the Linksys ATA. Changing between the tabs on the Voice page does not discard the unsubmitted changes. You can wait until completing all your changes on the Voice pages before submitting them. Note Changing between the Router and Voice pages discards any unsubmitted changes to either page. Step 4 Click the Voice tab. 2-22 Linksys ATA Administrator Guide Document Version 3.1

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186

2-22
Linksys ATA
Administrator Guide
Document Version 3.1
Chapter 2
Getting Started
Using the Administration Web Server
For example, to input password
test#@1234
by phone keypad, you need to press the following
sequence of digits:
8378001234
.
1.
After entering a value, press the
#
(pound) key to indicate end of input.
To save value, press
1.
To review the value, press
2.
To re-enter the value, press
3.
To cancel the value entry and return to the main configuration menu, press
*
’ (star).
Notes:
The final # key is not included in the password value.
Saved settings take effect when the telephone is hung-up, and if necessary, the Linksys ATA
automatically reboots.
2.
After one minute of inactivity, the unit times out. The user needs to re-enter the configuration menu
from the beginning by pressing
* * * *
.
Using the Administration Web Server
This section describes how to use the administration web server to configure the Linksys ATA. It
includes the following topics:
Connecting to the Administration Web Server, page 2-22
Administrator Account Privileges, page 2-23
Connecting to the Administration Web Server
To access the Linksys ATA administration web server, perform the following steps.
Step 1
Launch a web browser on a computer connected to the Linksys ATA.
You access the administration web server through the Internet (WAN) interface on the Linksys ATA.
Step 2
Determine the address of the administration web server.
a.
Connect an analog telephone to the Phone 1 or Phone 2 port on the Linksys ATA.
b.
Press
****
on the keypad to access the IVR menu.
c.
Press
110#
to determine the Internet (WAN) IP address.
Step 3
Direct the browser to the IP address of the Linksys ATA.
Changing between the tabs on the Voice page does not discard the unsubmitted changes. You can wait
until completing all your changes on the Voice pages before submitting them.
Note
Changing between the Router and Voice pages discards any unsubmitted changes to either page.
Step 4
Click the
Voice
tab.