Cisco SPA1001 Administration Guide - Page 89
PSTN Line Status - voip ms
View all Cisco SPA1001 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
Chapter 5 Linksys ATA Field Reference PSTN Line Status Info Tab Note References to the SPA3102 also apply to the AG310. Field Description (PSTN) Hook State Hook state of the FXO port. Either On or Off. (PSTN) Line Voltage The voltage existing on the PSTN line. (PSTN) Loop Current The current (milliamperes) existing on the local loop. Registration State Indicates if the line has registered with the SIP proxy. Last Registration At Last date and time the line was registered. Next Registration In Number of seconds before the next registration renewal. Last Called VoIP Number The last VoIP number called from the FXO Line. Last Called PSTN Number The PSTN number dialed by the SPA (logged only if a non-trivial dial plan is used). Last VoIP Caller The last VoIP caller to the FXO Line. Last PSTN Caller Name and number of the last PSTN caller. Last PSTN Disconnect Reason Reason for SPA hanging up the FXO port. Can be one of the following: • PSTN Disconnect Tone • PSTN Activity Timeout • CPC Signal • Polarity Reversal • VoIP Call Failed • VoIP Call Ended • Invalid VoIP Destination • Invalid PIN • PIN Digit Timeout • VoIP Dialing Timeout • PSTN Gateway Call Timeout • VoIP Gateway Call Timeout PSTN Activity Timer Shows the time (ms) before the SPA disconnects the current gateway unless the PSTN side has some audio activity. Mapped SIP Port Same as Line 1. Document Version 3.2 Linksys IP Phone Administrator Guide 5-5