Cisco SPA1001 Administration Guide - Page 170

Enhanced Services Three-Way Ad-Hoc Conference Calling Appendix C User Guidelines Service description User action required to activate or use Expected call and network behavior User action required to deactivate or end This feature allows the user to conference up to two other numbers on the same line to create a three-way call. If you are already on a call and wish to add a third party: 1. Press the switch hook or flash button 2. Listen for dial tone 3. Dial the third party normally 4. When the third party number starts to ring press the switch hook or flash button again You now have the original caller and the third party together with you on the same call. If you want to initiate a new three-way call: 1. Call the first party in the normal manner 2. Follow the directions for adding a third party (see instructions above) The SPA can host a three-way conference and perform three-way audio mixing (without the need of an external conference bridge device or service). If you also have Call Transfer, you can also hang up at any time to transfer the original caller to the third party Call Return Service description User action required to activate or use Expected call and network behavior User action required to deactivate or end The SPA supports a service that allows the SPA to automatically dial the last caller's number. 1. Pick up the receiver 2. Listen for dial tone 3. Press *69 to dial back the last caller that tried to reach you. This service gives the user the convenience of recalling the last incoming call to their number automatically. No user action required. Linksys ATA Administrator Guide C-8 Document Version 3.01