Cisco SPA1001 Administration Guide - Page 67
Using a FAX Machine with the SPA2102 or SPA8000
View all Cisco SPA1001 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Chapter 3 Configuring Linksys ATAs Using a FAX Machine with the SPA2102 or SPA8000 SAS Enable[1] = no MOH Server [1] = [email protected]:5061 or [email protected]:5061 SAS Enable[2] = yes On Linksys ATA 2: SAS Enable[1] = no MOH Server [1] = [email protected]:5061 SAS Enable[2] = no MOH Server [2] = [email protected]:5061 Configuring the Streaming Audio Server The following provides step-by-step procedures for implementing an SAS with an external music source. Step 1 Step 2 Connect an RJ-11 adapter between the music source and an FXS port on the Linksys ATA (Phone 1 or Phone 2). On the administration web server, click the SIP tab and scroll down to the Streaming Audio Server section (see Figure 1-16). Figure 1-16 Enabling the Streaming Audio Server Step 3 Step 4 Step 5 On the SAS Enable pull-down selection list, select yes. In the MOH Server field of the Call Feature Settings section, enter the User ID configured for the line attached to the audio source. If the line is not registered with the SIP proxy, enter the IP address and SIP port number configured for the line. Click Submit All Changes. Using a FAX Machine with the SPA2102 or SPA8000 Note T.38 Fax is only supported on the SPA2102 and the SPA8000. The SPA2102 supports a single connection, whilethe SPA8000 supports one connection for each pair of ports (1/2, 3/4, 5/6, and 7/8) for a maximum of four connections. Procedure To optimize fax completion rates, complete the following steps: Document Version 3.1 Linksys ATA Administrator Guide 3-15