Cisco SPA1001 Administration Guide - Page 154

PSTN User Tab (SPA3102/AG310) Chapter 5 Linksys ATA Field Reference PSTN User Tab (SPA3102/AG310) This section describes the fields for the following headings on the PSTN User tab on the SPA3102: • PSTN-To-VoIP Selective Call Forward Settings, page 5-70 • PSTN-To-VoIP Speed Dial Settings, page 5-70 • PSTN Ring Thru Line 1 Distinctive Ring Settings, page 5-70 • PSTN Ring Thru Line 1 Ring Settings, page 5-71 • PSTN/VoIP Caller Commands via DTMF, page 5-71 Note References in this section to the SPA3102 also apply to the AG310. PSTN-To-VoIP Selective Call Forward Settings Field Cfwd Sel1 Caller Cfwd Sel1 Dest Block Last Caller Accept Last Caller Description First of eight PSTN Caller Number Patterns to be blocked for VoIP gateway services or forwarded to a certain VoIP number. If the caller is blocked, the SPA will not auto-answers the call. VoIP destination to forward a PSTN caller matching . If this entry is blank, the PSTN caller is blocked for VoIP service. ID of caller blocked via the Block Last Caller service ID of caller accepted via the Accept Last Caller service PSTN-To-VoIP Speed Dial Settings Field Speed Dial 2/3/4/5/6/7/8/9 Description The VoIP number to call when the PSTN caller dials a single digit '2' PSTN Ring Thru Line 1 Distinctive Ring Settings Field Ring1/2/3/4/5/6/7/8 Caller Description First of 8 PSTN Caller Number Patterns such that the corresponding ring will be used to ring through Line 1 if the PSTN caller matches this pattern. 5-70 Linksys IP Phone Administrator Guide Document Version 3.2