Cisco SPA1001 Administration Guide - Page 173

Appendix C User Guidelines Call FWD-No Answer Enhanced Services Service description User action required to activate or use Calls are forwarded to the designated forwarding number after a configurable time period elapses while the SPA is ringing and does not answer. 1. Lift the receiver 2. Listen for dial tone 3. Press *92Listen for dial tone and enter the telephone number you are forwarding your call to. Activation is confirmed with three short bursts of tone and your forwarding is activated. Alternatively, the user can activate this feature from a web browser interface. Note The forward delay is entered from the web interface. Default is 20s. Expected call and network behavior This feature allows a user the option to divert (forward) calls to their telephone number to any other dialable number when their phone is not answered by using the touchtone keypad of their telephone or web browser interface. This service is activated or deactivated from the phone being forwarded or the web browser interface. User action required to 1. Lift the receiver deactivate or end 2. Listen for dial tone 3. Press *93 You will hear a confirmation tone signaling your change has been accepted. Alternatively, the user can deactivate this feature from a web browser interface. Anonymous Call Blocking Service description User action required to activate or use Expected call and network behavior User action required to deactivate or end By setting the corresponding configuration parameter on the SPA, the subscriber has the option to block incoming calls that do not reveal the Caller ID of the caller. 1. Pick up the receiver 2. Listen for dial tone 3. To activate, press *77 When activated by the user, callers hear a busy tone. To de-activate, press *87 Document Version 3.01 Linksys ATA Administrator Guide C-11