Cisco SPA1001 Administration Guide - Page 61

Chapter 3 Configuring Linksys ATAs Configuring a Dial Plan Dial Plan Timers The dial plan functionality is regulated by the following configurable parameters: • Interdigit_Long_Timer • Interdigit_Short_Timer • Dial_Plan ([1] and [2]) Interdigit Long Timer ParName Default Interdigit_Long_Timer 10 The specifies the default maximum time (in seconds) allowed between dialed digits, when no candidate digit sequence is as yet complete (see the discussion of the Dial_Plan parameter for an explanation of candidate digit sequences). Interdigit Short Timer Dial Plans ParName Default Interdigit_Short_Timer 3 The specifies the default maximum time (in seconds) allowed between dialed digits, when at least one candidate digit sequence is complete as dialed (see the following discussion of Dial_Plan parameters for an explanation of candidate digit sequences). ParName Default Dial_Plan[n] for Each Line n (*xx | [3469]11 | 0 | 00 | [2-9]xxxxxx | 1[2-9]xx[2-9]xxxxxx | 011x. ) The Dial_Plan parameters contain the actual dial plan scripts for each line n, where n is a number from 1 to 4. Document Version 3.1 Linksys ATA Administrator Guide 3-9