Cisco SPA1001 Administration Guide - Page 144
Ring Settings, FXO PSTN Timer Values sec
View all Cisco SPA1001 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 144 highlights
PSTN Line Tab Field VoIP User 1/2/3/4/5/6/7/8 Password Chapter 5 Linksys ATA Field Reference Description The password to be used with VoIP User 1. The user assumes the identity of VoIP User 1 must therefore compute the credentials using this password, or the INVITE will be challenged with a 401 response The default is blank. Field Description VoIP User 1/2/3/4/5/6/7/8 Auth ID The first of 8 user-id's that a VoIP Caller can use to authenticate itself to the SPA using the HTTP Digest method (in other words, by embedding an Authorization header in the SIP INVITE message sent to the SPA. If the credentials are missing or incorrect, the SPA will challenge the caller with a 401 response). The VoIP caller whose authentication user-id equals to this ID is referred to VoIP User 1 of this SPA. Note: If the caller specifies an authentication user-id that does not match any of the VoIP User Auth ID's, the INVITE will be rejected with a 403 response. The default is blank. VoIP User 1/2/3/4/5/6/7/8 DP Index of the dial plan in the dial plan pool to be used with VoIP User 1. The default is 1. VoIP User 1/2/3/4/5/6/7/8 Password The password to be used with VoIP User 1. The user assumes the identity of VoIP User 1 must therefore compute the credentials using this password, or the INVITE will be challenged with a 401 response The default is blank. Ring Settings Field Default Ring Description 1-8, Follow Line Cfg FXO (PSTN) Timer Values (sec) Field VoIP Answer Delay Description Delay in seconds before auto-answering inbound VoIP calls for the FXO account. The range is 0-255. The default is 3. 5-60 Linksys IP Phone Administrator Guide Document Version 3.2