Cisco SPA1001 Administration Guide - Page 171

Appendix C User Guidelines Automatic Call Back Enhanced Services Service description This feature allows the user to place a call to the last number they tried to reach whether the call was answered, unanswered, or busy, by dialing an activation code. User action required to 1. Pick up the receiver activate or use 2. Listen for dial tone 3. Press *07 Expected call and network behavior If the number called is idle, the call rings through and completes normally. If the called number is busy, the user hears a special announcement and the feature monitors the called number for up to 30 minutes. When both lines are idle, the user hears a special ring. During the monitoring process, the user can continue to originate and receive calls without affecting the Call Return on Busy request. Call Return on Busy requests can be canceled by dialing the deactivation code. User action required to 1. Lift the receiver deactivate or end 2. Listen for dial tone 3. Press *__ Call FWD-Unconditional Service description All calls are immediately forwarded to the designated forwarding number. The SPA does not ring or provide call waiting when Call FWD-Unconditional is activated. User action required to 1. Lift the receiver activate or use 2. Listen for dial tone 3. Press *72 4. Listen for dial tone and enter the telephone number you are forwarding your call to. Activation is confirmed with three short bursts of tone and your forwarding is activated. Alternatively, the user can activate this feature from a web browser interface. Document Version 3.01 Linksys ATA Administrator Guide C-9