Cisco SPA1001 Administration Guide - Page 90

Info Tab Chapter 5 Linksys ATA Field Reference Call Type VoIP State PSTN State VoIP Tone PSTN Tone VoIP Peer Name PSTN Peer Name VoIP Peer Number PSTN Peer Number VoIP Call Encoder VoIP Call Decoder VoIP Call FAX VoIP Call Remote Hold VoIP Call Duration VoIP Call Packets Sent VoIP Call Packets Recv VoIP Call Bytes Sent VoIP Call Bytes Recv VoIP Call Decode Latency VoIP Call Jitter VoIP Call Round Trip Delay May take one of the following values: • PSTN Gateway Call = VoIP-To-PSTN Call • VoIP Gateway Call = PSTN-To-VoIP Call • PSTN To Line 1 = PSTN call ring through and answered by Line 1 • Line 1 Forward to PSTN Gateway = VoIP calls Line 1 then forwarded to PSTN GW • Line 1 Forward to PSTN Number =VoIP calls Line 1 then forwarded to PSTN number • Line 1 To PSTN Gateway • Line 1 Fallback To PSTN Gateway Same as Line 1 Call 1. May take one of the following values: • Idle • Collecting PSTN Pin • Invalid PSTN PIN • PSTN Caller Accepted • Connected to PSTN Same as Line 1 Call 1 (Indicate what tone is being played to the VoIP call leg). Indicate what tone is being played to the PSTN call leg. Same as Line 1 Call 1 (Name of the party at the VoIP call leg). Name of the party at the PSTN call leg. Same as Line 1 Call 1 (Phone number of the party at the VoIP call leg). Phone number of the party at the PSTN call leg. Same as Line 1 Call 1 (Audio encoder being used for the VoIP call leg). Same as Line 1 Call 1 (Audio decoder being used for the VoIP call leg). Same as Line 1 Call 1. Same as Line 1 Call 1. Same as Line 1 Call 1. Same as Line 1 Call 1. Same as Line 1 Call 1. Same as Line 1 Call 1. Same as Line 1 Call 1. Same as Line 1 Call 1. Same as Line 1 Call 1. Same as Line 1 Call 1. Linksys IP Phone Administrator Guide 5-6 Document Version 3.2