Cisco SPA1001 Administration Guide - Page 151
Speed Dial Settings, Supplementary Service Settings - user manual
View all Cisco SPA1001 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 151 highlights
Chapter 5 Linksys ATA Field Reference Speed Dial Settings User 1/2 Tab Field Speed Dial 2/3/4/5/6/7/8/9 Description Target phone number (or URL) assigned to speed dial 2, 3, 4, 5, 6, 7, 8, or 9. The default is blank. Supplementary Service Settings The Linksys IP phone provides native support of a large set of enhanced or supplementary services. All of these services are optional. The parameters listed in the following table are used to enable or disable a specific supplementary service. A supplementary service should be disabled if a) the user has not subscribed for it, or b) the Service Provider intends to support similar service using other means than relying on the Linksys IP phone. Field CW Setting Block CID Setting Block ANC Setting DND Setting CID Setting CWCID Setting Dist Ring Setting Secure Call Setting Miss Call Shortcut Message Waiting Description Call Waiting on/off for all calls. The default is yes. Block Caller ID on/off for all calls. The default is no. Block Anonymous Calls on or off. The default is no. DND on or off. The default is no. Caller ID Generation on or off. The default is yes. Call Waiting Caller ID Generation on or off. The default is yes. Distinctive Ring on or off. The default is yes. If yes, all outbound calls are secure calls by default. The default is no. Enables or disables the display of missed calls on the LCD display. This is updated when there is voicemail notification received by the Linksys IP phone. The user can also manually modify it to clear or set the flag. Setting this value to yes can activate stutter tone and VMWI signal. This parameter is stored in long term memory and will survive after reboot or power cycle. The default is no. Document Version 3.2 Linksys IP Phone Administrator Guide 5-67