Compaq ProLiant 1600 Compaq ProLiant 1600 and ProLiant 1200 Servers Maintenanc - Page 25
Pivot each foot down, and pull it off the base of the chassis
View all Compaq ProLiant 1600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
2-7 Feet To remove the feet from the chassis, one at a time: 1. Perform the preparation procedures. See page 2-2. 2. Remove the front bezel. See page 2-6. 3. Place the server on its left side. 4. Remove the T-15 screw from each foot . 5. Pivot each foot down , and pull it off the base of the chassis . 3 2 1 Figure 2-2. Removing the Feet From the Chassis Reverse steps 1 through 5 to replace the feet. Make sure each foot snaps securely in its holders. Compaq ProLiant 1600 and ProLiant 1200 Servers Maintenance and Service Guide
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
2-7
Compaq ProLiant 1600 and ProLiant 1200 Servers Maintenance and Service Guide
Feet
To remove the feet from the chassis, one at a time:
1.
Perform the preparation procedures. See page 2-2.
2.
Remove the front bezel. See page 2-6.
3.
Place the server on its left side.
4.
Remove the T-15 screw from each foot
.
5.
Pivot each foot down
, and pull it off the base of the chassis
.
1
2
3
Figure 2-2.
Removing the Feet From the Chassis
Reverse steps 1 through 5 to replace the feet. Make sure each foot snaps securely
in its holders.