Compaq ProLiant 1600 Compaq ProLiant 1600 and ProLiant 1200 Servers Maintenanc - Page 84
Primary Processor Test Error Codes, Table 3-2
View all Compaq ProLiant 1600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
3-30 Diagnostic Tools 5. Delete the power-on password, if set. You will know that the power-on password is set when a key icon appears on the screen when POST completes. If this occurs, you must enter the password to continue. To delete the password, type the current password, a forward slash ( / ), and press the Enter key. 6. If you do not have access to the password, you must disable the power-on password by using the Password Disable switch on the system board. 7. When required by Diagnostics, install a loopback plug (Part Number 142054-001). 8. Run the latest version of Diagnostics. Primary Processor Test Error Codes The 100 series of Diagnostic error codes identifies failures with processor and system board functions. Corrective action may require replacement of system boards or processor assemblies (either processor boards or system boards that include the processor). Table 3-2 Primary Processor Test Error Codes Error Code Description 101-xx CPU test failed. 103-xx 104-xx 105-xx 106-xx DMA page registers test failed. Interrupt controller master test failed. Port 61 error. Keyboard controller self-test failed. Recommended Action Replace the processor board and retest. For error codes 103-xx through 106-xx, replace the processor board and retest. 107-xx 108-xx 109-xx CMOS RAM test failed. CMOS interrupt test failed. CMOS clock load data test failed. The following steps apply to error codes 107-xx through 109-xx. 1. Replace the battery/clock module and retest. 2. Replace the system board and retest. 110-xx 111-xx 112-xx 113-xx Programmable timer load data test For error codes 110-xx through failed. 113-xx, replace the system board Refresh detect test failed. and retest. Speed test slow mode out of range. Protected mode test failed.