Compaq ProLiant 1600 Compaq ProLiant 1600 and ProLiant 1200 Servers Maintenanc - Page 28
Right Side Access Panel
View all Compaq ProLiant 1600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
2-10 Removal and Replacement Procedures Right Side Access Panel Remove the right side access panel to convert from tower to rack or to replace a damaged panel. To remove the right side access panel from the chassis: 1. Perform the preparation procedures. See page 2-2. 2. Remove the front bezel. See page 2-6. 3. Remove the feet on the base of the right side access panel. See page 2-7. 4. Remove the two T-15 screws securing the right side access panel to the front of the chassis. 5. Pull the right side access panel back and away from the chassis. Figure 2-5. Removing the Right Side Access Panel Reverse steps 1 through 5 to replace the right side access panel.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
2-10
Removal and Replacement Procedures
Right Side Access Panel
Remove the right side access panel to convert from tower to rack or to replace a damaged
panel. To remove the right side access panel from the chassis:
1.
Perform the preparation procedures. See page 2-2.
2.
Remove the front bezel. See page 2-6.
3.
Remove the feet on the base of the right side access panel. See page 2-7.
4.
Remove the two T-15 screws securing the right side access panel to the front
of the chassis.
5.
Pull the right side access panel back and away from the chassis.
Figure 2-5.
Removing the Right Side Access Panel
Reverse steps 1 through 5 to replace the right side access panel.